|
 |
100
Z Soap/CUDA Super Clean:
An all-purpose automatic parts washer detergent. This powdered
concentrate is effective in cleaning a variety of parts,
including iron, steel, soft metals, plastics and electronics.
Contains a corrosion inhibitor package and a modified defoamer
package to assist with foam control in the sump solution.
Available in 40 or 450 lb. Containers |
 |
Rust Inhibitor Detergent:
The ideal rust-inhibitor package for parts washers as it
prevents corrosion of both wetted surfaces and metal surfaces
exposed to steam. Most detergents have inhibitors that work in
the liquid phase, but ours has a characteristic that allows the
inhibitor package to blend with the steam for total protection.
Available in 5 or 55 Gallon Containers |
|
 |
Paint and Powder Coat Remover:
This specialized biodegradable, non-corrosive detergent is quick
and effective at dissolving stubborn paint and powder coats -
including epoxy paints - from iron and steel (it is not intended
for use on aluminum, magnesium or galvanized metals). This
product turns your parts washer into a powerful,
environmentally safe paint and powder- coat stripping system.
Available in 5 or 55 Gallon Containers |
 |
CLC
Manual Parts Washer Detergent:
A fully biodegradable, phosphate-free, neutral pH water-based
detergent formulated for use in manual parts washers and aqueous
parts sinks. It removes greases, oils and grime and can be used
on most surfaces, including metal, painted and plastic parts.
Available in 5 Gallon Containers |
|
 |
AlumaKleen Detergent:
As its name implies, AlumaKleen is designed specifically for
cleaning aluminum. It can also be used safely on a number of
other alloys, including brass, stainless steel, steel and
copper, as well as plastics. AlumaKleen is formulated for use in
hard or soft water and is especially effective for removing
baked-on carbons and oils.
Available in 5 or 55 Gallon Containers |
 |
HPI
EL:
Designed for use in hot spray pressure cabinet systems, conveyor
type washers and immersion cleaning equipment. Long lasting -
reduces changing and cleaning and extends solution life for
lower disposal costs. Removes grease, oil and dirt. Specially
formulated for cleaning steel, aluminum, electric motors, other
sensitive metals, rubbers and plastic parts. Rinses completely.
Leaves no residue to attract moisture.
Available in 5 Gallon or 55 Gallon Containers |
|
 |
HPI
POWER BRITE:
Power Brite is
designed to clean the inside and outside of over the road
tractors, trailers and other type commercial vehicles. It will
clean and brighten aluminum surfaces as well as painted surfaces
without damage when used as directed. This product will remove
carbon stack stain and magnetic road film from trailers without
brushing. It will work in cold water, as well as hot water, and
rinse free at any temperature.
Available in 55 Gallon Drums or 330 Gallon Totes |
 |
HPI
RA-21:
RA-21 is a slightly
alkaline rinse aid/cleaner/inhibitor concentrate for use on
ferrous metals such as carbon and stainless steel. It can also
be used on copper and copper alloys. At high concentrations
RA-21 is an effective cleaner for removing organic containments
such as oil and grease without attacking the metal surface.
Available in 55 Gallon Drums or 330 Gallon Totes |
|
 |
HPI
AC-34:
AC-34 is a high
alkaline cleaner/degreaser concentrate for use on ferrous metals
such as carbon and stainless steel. It can also be used on
copper and copper alloys. AC-34 has been specially designed to
remove organic containments such as oil and grease without
attacking the metal surface.
Available in 55 Gallon Drums or 330 Gallon Totes |
|
|