|
HN Series
Common Features
Stainless Steel Housing:
Coil enclosure and motor cover are constructed of stainless
steel for lifetime corrosion resistance; powder coated welded
chassis provides durability.
Unmatched Access and Serviceability:
Pivoting cover opens to provide exceptional pump and component
access. Standard skid legs provide access from below.
Clean and Efficient Heating System:
24v automatic electronic ignition on low emission natural gas
burner with no pilot to light. High efficiency schedule 80 coil
with ceramic insulation delivers years of uninterrupted service.
Total Relief Unloader:
Flow sensitive unloader allows pressure to build up gradually as
trigger gun is activated reducing gun recoil. When gun is
released the entire system and discharge piping is relieved of
trapped pressure.
NEMA4 Water Tight Electrical Box:
ETL certified to UL1776 Class 2 for use in wash-down area,
exceeds industry standards. Special Hydro Tek control box
features easy to use controls and provides instant access to
electronics. Standard diagnostic indicators, including an hour
meter and pressure gauge to monitor system use, ensure optimal
system performance.
HN Ultimate Series Features
Remote Control with Hose, Nozzle, Wand Rack:
Safe, 24 volt remote with full pressure soap output and 100’
cord gives the operator control of all functions both at the
machine and
the remote wash site. Additional wash station remotes can be
added.
Automatic Shutdown:
Adjustable automatic shutdown prolongs pump life and provides
worry-free operation.
CAT Belt Driven pump:
Low RPM drive – cooler, quieter, continuous duty performance.
These industrial triplex pumps feature concentrically bored and
polished, graphite impregnated ceramic plungers with advanced
seal design.
Ready to Work when you are:
No need to fill fuel tanks or hunt down a water supply when
machine is directly plumbed into natural gas and water lines.
The pressure washer can be housed indoors, away from the
elements, while locating the wash station remote outdoors.
More Standard Features:
-
Detergent flow metering at full pressure
-
Quick release nozzles
-
Heavy duty industrial motor with standard thermal overload
protection
-
Adjustable temperature up to 250F with steam setting
-
Burst disc technology for operator safety
-
Rustproof float tank to regulate incoming water ensuring
consistent system performance
-
Heavy duty hose 50’ 5000 PSI/ 250F rated and stainless steel
-
“Ultra Gun” with adjustable pressure
HN Proline™ Series Features
Bypass Cool System:
Pump cooling system prevents pump from overheating in bypass for
worry free operation. (Remote wash station and pressure gage not
included on HN Proline™)
Specifications
|
Model |
PSI |
GPM |
Temp. |
HP |
Voltage |
|
|
|
|
|
|
|
|
HN20004E8R |
2000 |
4.3 |
250 |
5 |
208v - 1ph 22amp |
|
HN22005E2R |
2200 |
4.2 |
250 |
6.5 |
230v - 1ph 25amp |
|
HN21004E3R |
2100 |
4.0 |
250 |
6 |
230v - 3ph 20amp |
|
HN21004E4R |
2100 |
4.0 |
250 |
6 |
460v - 3ph 10amp |
|
HN32004E2R |
3200 |
3.5 |
250 |
7.5 |
230v - 1ph 32amp |
|
HN35005E3R |
3500 |
4.3 |
250 |
10 |
230v - 3ph 27amp |
|
HN35005E8R |
3500 |
4.3 |
250 |
10 |
200 /208v - 3ph 30amp |
|
HN35005E4R |
.3500 |
4.3 |
250 |
10 |
460v - 3ph 14amp |
|
HN30008E3R |
3000 |
7.4 x2 |
250 |
15 |
230v 3ph 34amp |
|
HN30008E4R |
3000 |
7.4 x2 |
250 |
15 |
460v 3ph 17amp |
|
HN30008E8R |
3000 |
7.4 x2 |
250 |
15 |
208v 3ph 38amp |
|
|
|
|
|
|
|
|
HN20004E2C |
2000 |
3.8 |
250 |
5 |
230v - 1ph 22amp |
|
HN20004E8C |
2000 |
3.8 |
250 |
5 |
208v - 1ph 22amp |
|
HN20005E2H |
2000 |
4.8 |
250 |
6.5 |
230v - 1ph 25amp |
|
HN30005E8H |
3000 |
4.8 |
250 |
10 |
200/208v - 3ph 30amp |
|
HN30005E4H |
3000 |
4.8 |
250 |
10 |
460v - 3ph 14amp |
|
HN30008E3H |
3000 |
2 x 3.7 |
200 |
15 |
230v - 3ph 34amp |
|
HN30008E8H |
3000 |
2 x 3.7 |
200 |
15 |
208v - 3ph 38amp |
|
HN30008E4H |
3000 |
2 x 3.7 |
200 |
15 |
460v - 3ph 17amp |
Specifications may vary, consult factory for custom models
|
